Sample calculation reports
These PDFs are exactly what the Print report button produces in the AStrutTie web app — nothing was retouched. They were printed on the Free plan, so each page carries the “AStrutTie Free” mark that every Free print has.
Each report starts from a built-in template with its default dimensions, materials and loads. They show what a report contains; they are not the worked examples on this site, whose numbers come from the Technical Book.
What a report contains
- Project and model summary — template, design code, unit system, and the number of nodes, members, struts, ties and supports
- Materials and design parameters — concrete strength, rebar yield strength, confinement factor and member thickness
- Load cases and combinations, member axial forces for every combination, and the governing envelope for each member
- Strut, tie, nodal-zone and development length checks, each citing its ACI 318-25 clause (for example §23.8.2 and §25.4)
- An STM OK / NG verdict for the struts, ties and nodal zones, with the development length result on a line of its own
The footer of every page states that reviewing the design remains the user's responsibility — the report documents the checks, it does not replace an engineer's judgment.
Print one of your own
Open AStrutTie in your browser, sign in with your email, pick a template and print the report. The Free plan needs no installation and no card; its prints carry the Free mark.
Teaching or studying? The academic license is AStrutTie Pro, free for 12 months. Academic license →